查看: 885|回复: 0

声级校准器的设计

[复制链接]

40

主题

142

帖子

358

积分

管理员

Rank: 9Rank: 9Rank: 9

积分
358
发表于 20:51 | 显示全部楼层 |阅读模式
论文编号ZXX142  论文字数:10241,页数:35
摘要
 随着人们对环境保护的重视,噪声研究在人们生活中有着越来越重要的地位。这时人们就开始生产出声级计,声级计是用来测量环境噪声大小的仪器。而本课题将要研究的是声级校准器,该仪器是一种能在一个或几个频率点上产生一个或几个恒定声压的声源。它用来校准测试传声器、声级计及其他声学测量仪器的绝对声压灵敏度,有时候还将它作为声测量装置的一部分。
 本论文主要通过硬件和软件两个部分介绍带声负反馈的声级校准器的工作原理、主要的性能特点。在原有声级校准器的基础上加入了对输出声音的反馈和调整。原有声级校准器只能输出单一声信号,而本论文介绍的带声负反馈的声级校准器只能产生94 dB声压信号外,还可以产生114 dB(或104 dB)几种声压级。因为单片机能对反馈的声信号做出调节,所以带声负反馈的声级校准器输出的声信号的稳定度也比其他声级校准器好。
关键词: 声校准器、负反馈、声压级
ABSTRACT
 With the enhanced awareness of environmental protection, noise research has become an increasingly important position in people's living. Then people began to produce a sound level meter, an instrument which is used to measure noise level. This subject is to study an instrument called the sound level calibrator that can generate one or more constant pressure of the sound source in one frequency point or a few. It is used to calibrate the absolute acoustic sound pressure sensitivity of the test microphone, sound level meter and other measuring instruments, and sometimes it is also be a part of the sound measuring devices.
 This paper introduces the working principle and the main performance characteristics of the sound level calibrator with negative feedback. It has added the feedback and adjustment of the output based on the original sound level calibrator which can only output a single sound signal. The sound level calibrator with negative feedback in this paper not only can generate 94 dB sound pressure, but also can produce several sound pressure level of 114 dB (or 104 dB). Since the MCU can adjust the feedback sound signal, the stability of the sound signal of the sound level calibrator with negative feedback is better than others.
Keywords: Sound Calibrator,Negative Feedback,Sound Pressure Level
 
 目录
摘要 I
ABSTRACT II
第1章 引言 1
1.1 研究背景 1
1.2国内外现状 1
1.3 研究内容 3
第2章 系统硬件设计 4
2.1  硬件总体框图 4
2.2  系统主要芯片 5
2.3  单片机AT89C2051对电路的控制 11
2.4  A/D转化和D/A转化模块 13
第3章 系统软件设计 16
3.1 概述 16
3.2 程序流程图 16
3.3 系统主要子程序 17
第4章 系统调试 23
第5章 系统设计总结 24
5.1 本论文的主要结论 24
5.2 需进一步研究的问题 24
致谢 25
参考文献 26
附录1  系统总体电路图 27
附录2  实物图 29
附录3  元器件清单 30
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

 
在线客服
点击这里给我发消息 点击这里给我发消息
免费下载论文
一站式论文服务

微信扫一扫,多种方式联系平台客服!
  • 关于资料
    提供的资料属本站所有,内容审核过,保证质量,严禁转载.
  • 关于发货
    提供下载链接或发送至您的邮箱,资料可重复发送,确保您收到为止.
  • 疑难解答
    收到资料后若有任何疑难问题,均可通过本站客服提供帮助解决.
  • 售后服务
    我们确保发送的资料和介绍一致,如核实为不符,可以申请售后.
  • 本站邦邦毕业论文网所列毕业设计(论文)资料均属于原创者所有,初衷是为大家在做毕业设计(论文)过程中参考和学习交流之用,请勿做其他非法用途,转载必究,如有侵犯您的权利或有损您的利益,请联系本站,经查实我们会立即进行修正或删除相关内容! 2a7a.com 版权所有,严禁抄袭 桂ICP备18006264号-1 写作人才招聘
    客服服务时间:09:00-22:30(周一至周日)
    返回顶部